[ledmirageb4]

Whats on the Table now?

[jp554731]

I've got a Hi Nu Gundam Conversion and Powered GM
how bout u?

Attached File(s)

•  DSC02942.JPG (1.97MB)
  Number of downloads: 921

[zeo-mare]

first on my list is a huge kitbash of the Bandai and Coreworks Strike Freedom, I am useing the Wings and weapons as well as a few other parts from the MG Strike Freedom, I will also be useing some parts from the Neograde Strike Freedom Evolve and some diecast boosters from AKO Hobby



second is a MG Crossbone Gundam X-2, i am useing a few parts form the Coreworks kit as well as the X Boosters on the back from Neograde, diescast boosters from Mechaskunk and Akohobby are also on this kit. I made a custom lance for it useing a lance that Mechaskunk had up for the Gyan, it is very similar to the one the X-2 has i added custom decals as well as a few parts from the EX-S to it to make it stand out.i have to take some new pics i hate the fact that the camera picks up dust but i for some reason cannot see any at all.



the unfinished lance (need to take better picture off so you can see the detail and no dust)

[zeo-mare]

hi i do not recast parts ( I wish), the MG strike freedom body and leftover parts will be put to good use i want to use the innerframe and parts and combine it with the 1/100 HG Saviour Gundam to make a MG version, it is just started but i want to finish the other kits first, i managed to get some of the smaller parts for the coreworks x-2 in trades so i did not have to buy the full kit which saved me money. the Neograde Strike Freedom Evolve is a recast and only cost me about $25.00 to $30.00 so it is no real lose.

chris

[zeo-mare]

re-edited ( i realize the pics do not do it justice so i added the neograde parts on to give you a better ideea of what the kit will look like)

here is the Saviour Gundam kitbash, i am useing the 1/100 HG kit, the MG Strike Freedom, the Neograde Strike Freedom Evolve and some other parts to be determind as i go along. i think it will look good in the end it still has alot more work that needs to be done on it (mainly the chest) and it is only about 10% done. it is much more poseable then before and already far more sleeker



chris

[Sacred Blade Deimos]

I look like such an amateur in this thread...

The only one I have a picture of so far is my God Gundam with custom color scheme. It's almost done; but still needs to be clear-coated and panel-lined... I'm painting it by hand with Enamels, so progress is much slower than I'd like...

 100_9524.jpg (566.68K)
Number of downloads: 448

I'm also customizing an old ZZ non-grade AMX-107 Bawoo kit (reworking the Bawoo Top Fighter to transform similarly to the V-Dash Core Fighter), and working on an HG Zeta with resin conversion package (the one that seals up the bottom of the craft in Waverider mode).

I wish I had a better camera that could take better pictures, and is more efficient on batteries...

[Puffer Fiz]

my MG Z+ C1 prebuilt
the C1's cannon is longer than the kit is high @-@;
haha now add those together and you get how long it will be in wave rider mode

[jquintel]

sorry for no pics right now, i have actually alot of WIP's going on.. laying on my desk
basicly they're out of the box put together, so i can get an idea of what im wanting to do with each one.


all 1/100 Gundam Wings

Shenlong - stock
Shenlong - Camo
Altron - base build
Deathscythe - base build
Wing Gundam - basebuild

[ledmirageb4]

I love your hi nu gundam. Also I see gundam fix box. I am wondering which one you got ? Also I like the color of the crossbone. Looks like I am going to order a hi-nu later on. Too expensive for me now.

zeo-mare, on Apr 29 2007, 01:35 PM, said:

first on my list is a huge kitbash of the Bandai and Coreworks Strike Freedom, I am useing the Wings and weapons as well as a few other parts from the MG Strike Freedom, I will also be useing some parts from the Neograde Strike Freedom Evolve and some diecast boosters from AKO Hobby



second is a MG Crossbone Gundam X-2, i am useing a few parts form the Coreworks kit as well as the X Boosters on the back from Neograde, diescast boosters from Mechaskunk and Akohobby are also on this kit. I made a custom lance for it useing a lance that Mechaskunk had up for the Gyan, it is very similar to the one the X-2 has i added custom decals as well as a few parts from the EX-S to it to make it stand out.i have to take some new pics i hate the fact that the camera picks up dust but i for some reason cannot see any at all.



the unfinished lance (need to take better picture off so you can see the detail and no dust)

[rainguy]

stressfull !!! I'm fixing the paints on the 1/100 berlin sr2 fac2005
http://www.hobbyfana...o...1747&st=135

I'm also in the middle of assembling of kotobukiya, 1/100 dragonar 3 and finalizing the volks sav phantom red. Hopefully finish the sr2 by this week, phantom by next week, and still have no idea about the dragonar 3 custom.

[ledmirageb4]

rainguy, on Apr 29 2007, 11:40 PM, said:

stressfull !!! I'm fixing the paints on the 1/100 berlin sr2 fac2005
http://www.hobbyfana...o...1747&st=135

I'm also in the middle of assembling of kotobukiya, 1/100 dragonar 3 and finalizing the volks sav phantom red. Hopefully finish the sr2 by this week, phantom by next week, and still have no idea about the dragonar 3 custom.

You have tons of projects.

I wish I didn't bought the f-91 kit.

Not a crowd pleaser.

I love my gouf 1/144 scale much better than the F-91.

I also am building a wip auge too. But I need to finish my gouf before the Auge "WSC Version"

Whats a good fss kit that alot of people dig and a good GUndam kit alot of people dig. Do they like resin or plastic more nowadays?

[rainguy]

Aww, do the auge first, I'm not really interested on the 1/144 gouf the origin. It looks as ugly as the first time it appeared in the series, not like the newer drawings. While the auge, is an eyecatching kit . I believed you've seen the other post for the finished kit. It's more challenging !!

ledmirageb4, on Apr 30 2007, 04:45 PM, said:

I also am building a wip auge too. But I need to finish my gouf before the Auge "WSC Version"
Whats a good fss kit that alot of people dig and a good GUndam kit alot of people dig. Do they like resin or plastic more nowadays?

[HWR MKII]

Heres whats on mine.

http://www.hobbyfana...showtopic=12236

[ledmirageb4]

Yeah, Auge is looks much better. Good thing someone posted some pictures of the their Auge. From what I can say about his Auge is the pose is really bad . If you look carefully. The Auge is looking down. If I didn't see that , I would have built it like the instructions. I will elevate the head much more higher for a more elegant confident look.

Only reason why I am building that gouf is mono eye and some mods. It will look sick once I mod the chest too.

rainguy, on Apr 30 2007, 12:01 AM, said:

Aww, do the auge first, I'm not really interested on the 1/144 gouf the origin. It looks as ugly as the first time it appeared in the series, not like the newer drawings. While the auge, is an eyecatching kit . I believed you've seen the other post for the finished kit. It's more challenging !!

ledmirageb4, on Apr 30 2007, 04:45 PM, said:

I also am building a wip auge too. But I need to finish my gouf before the Auge "WSC Version"
Whats a good fss kit that alot of people dig and a good GUndam kit alot of people dig. Do they like resin or plastic more nowadays?